T series spiral bevel gear right-angle gearbox

Cast-iron right-angle gearboxes with spiral bevel gearing that turn the drive through 90°. Ten sizes (T02–T25), exact ratios from 1:1 to 5:1, output torque up to 5713 N·m. One or two input shafts, single- or double-ended output shaft and six mounting positions are available.

Sizes: T02, T04, T06, T07, T08, T10, T12, T16, T20, T25
Ratio: 1:1 – 5:1 (T02, T04: 1:1 and 2:1 only)
Rated input power: up to 335 kW (T25, 1:1, 870 r/min, on request)
Output torque: 11.2 to 5713 N·m
Input speed: 10–1450 r/min per table; above 1450 r/min consult the factory
Efficiency: 98% average
Shaft diameter: 15–85 mm
Weight: 2–488 kg
Service factor f1: 1.00–1.75 (up to 2.00 with more than 10 starts/hour)

Request a quote Catalog, PDF · 4 MB

Features

Exact ratios 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1 and 5:1
Average efficiency 98%
Runs in both directions; smooth, quiet, low-vibration operation
One or two input shafts; single-sided or double-sided output shaft
Works as a reducer (input on the single shaft) or as a speed increaser (input on the through shaft)
Six mounting positions: B3, B6, V5, B8, B7, V6
Design: housing, input-shaft housing, spiral bevel gears on bearing seats, oil seals and oil gauge

Designation

T 06 1:1 I-LRO B3

T	T series spiral bevel gear unit
06	size of the unit
1:1	ratio
I-LRO	shaft arrangement
B3	mounting position

Versions

I-…	one input shaft; the suffix gives the output-shaft sides
I-I-…	two input shafts (through input shaft)
U-… / D-…	input shaft pointing up (U) or down (D) relative to the housing feet
U-D-…	input shaft extended both up and down
LR / L / R	output shaft on both sides / left only / right only
UD / U / D	output shaft up and down / up only / down only
-O	mirrored gear arrangement — opposite output rotation direction
I-LR, I-R, I-L, I-UD, I-U, I-D, U-LR, U-R, U-L, D-LR, D-R, D-L, I-I-LR, I-I-R, I-I-L, I-I-UD, I-I-U, I-I-D, U-D-LR, U-D-R, U-D-L (+ -O)	full list of shaft arrangements in the catalogue

Mounting

Technical data

Rated output torque Mn2 (N·m) / input power Pn1 (kW) at n1 = 1450 r/min

Size	1:1	1.5:1	2:1	2.5:1	3:1	4:1	5:1
T02 (CRTM02)	11.6 / 1.79	—	12.1 / 0.94	—	—	—	—
T04 (CRTM04)	31.9 / 4.94	—	42.8 / 3.32	—	—	—	—
T06 (CRTM06)	96.0 / 14.9	117 / 12.1	102 / 7.90	96.2 / 5.97	93.6 / 4.84	80.6 / 3.12	52.0 / 1.61
T07 (CRTM07)	142 / 22.0	145 / 15.0	137 / 10.6	113 / 6.99	105 / 5.42	93.4 / 3.62	57.4 / 1.78
T08 (CRTM08)	294 / 45.6	185 / 19.1	180 / 14.0	184 / 11.4	159 / 8.20	124 / 4.80	68.7 / 2.13
T10 (CRTM10)	421 / 65.3*	374 / 38.7*	305 / 23.6	293 / 18.2	270 / 14.0	241 / 9.35	136 / 4.21
T12 (CRTM12)	619 / 96.0*	564 / 58.3*	516 / 40.0	507 / 31.4	458 / 23.6	434 / 16.8	296 / 9.18
T16 (CRTM16)	1019 / 163*	—	921 / 73.7	—	904 / 48.2	850 / 34.3	814 / 26.3
T20 (CRTM20)	— (1150 r/min: 1842 / 234*)	—	1578 / 126*	—	1529 / 82.3	1452 / 58.7	1391 / 44.9
T25 (CRTM25)	— (870 r/min: 3489 / 335*)	—	— (1150 r/min: 3146 / 199*)	—	2935 / 158	2798 / 113	2631 / 85.0

Sizes: ratios, maximum torque, shafts, weight

Size	Ratios	Mn2 at 1:1, n1 = 10 r/min, N·m	Shaft diameter, mm	Key width, mm	Output shaft centre height, mm	Weight, kg
T02	1:1, 2:1	13	15	5	52	2
T04	1:1, 2:1	43.0	19	6	76	10
T06	1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1	132	25	8	90	21
T07	1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1	214	32	10	100	32
T08	1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1	361	40	12	115	49
T10	1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1	561	45	14	140	78
T12	1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1	919	50	14	175	124
T16	1:1, 2:1, 3:1, 4:1, 5:1	1940	60	18	200	188
T20	1:1, 2:1, 3:1, 4:1, 5:1	3205	72	20	245	297
T25	1:1, 2:1, 3:1, 4:1, 5:1	5713	85	22	290	488